PCL pellets for making models for an art installation
Quick Details Port: Any port in China Payment Terms: L/C,T/T,Western Union,MoneyGram,Paypal Supply Ability: 10000 Kilogram/Kilograms per Month Biopolymers PLA PHA PCL pellets Type: 100% biodegradeble material Model No.: PLA PHA PCL pellets MFR: 2-8 g/10min Density: 1.15±0.05 g/cm3 Application: 3D printing filament , plastic film , household goods and so on Appearance: Natural white granules Full name: PLA PHA PCL pellets Delivery Detail: In 7~15 days Packaging Detail: 25 kg per bag PLA Polylactic acid is a biodegradable environmentally friendly material (in the composting conditions, broken down into carbon dioxide and water), widely used in injection molding, blown films, extruded sheets, fibers and other industries and areas. PHA is a kind of polyhydroxy fatty acid ester (Polyhydroxyalkanoates, PHAs) material, the meaning is to may company in the world's leading genetic engineering technology, use of renewable agricultural products and agricultural waste as raw material, through fermentation microorganisms directly in microbial synthesis in the body of a kind of biological macromolecule material. PCL Polycaprolactone is a biodegradable thermoplastic polymer derived from the chemical synthesis of crude oil. Although not produced from renewable raw materials, it is fully biodegradable. Specifications 1.100% biodegradable 2.made from corn starch and cornstalk PLA Polylactic acid Specification : ITEM STANDARD UNIT VALUE COLOUR Q/320113SSD001 – 2002 DENSITY GB/T 1033-1986 g/cm3 1.15±0.05 MFR GB/T 3682-2000 g/10 min 2-8 TENSILESTRENGTH GB/T 1040-1992 MPa ≥18 ELONGATIONBREAK GB/T 1040-1992 % >260 TEAR STRENGTH GB/T 1130-1991 KN/m2 ≥85 DEGRADABILITY (100 DAYS) ASTMD6400/EN13432 Day >98 PHA Specification: Properties Test Method Test Conditions Unit Test Value Specific gravity ASTM D-792 23°C g/cm3 1.27 Flow coefficient ASTM D-1238 190°C/2.16K g/10min 10-30 Tensile strength ASTM D-638 23°C,50mm/min Kgf/cm2 680 Elongation ASTM D-638 23°C,50mm/min % 12.5 Izod Impact Strength ASTM D-256 23°C,Notched 1/8” Kg-cm/cm 8.5 Bending strength ASTM D-790 23°C,15mm/min Kgf/cm2 620-650 Heat distortion temperature ASTM D-648 1820kpa °C 70 PCL Specification: Item Specifications Results Characters White round particles White round particles Inherent […]